Why Modular? |
Energy Rating & Cost Saving |
SPQ 3.3m x 14.4m Specification |
ECO MASTER |
||
|
|
|
|
STANDARD |
||
|
|
|
|
Benefits of Modular Villages Buildings |
||
| Modular Villages |
Competitors | |
| BASE | Universal Beam & 150mm RHS Joist - 3 Main Beams. | Universal Beam & 70mm RHS Joist - 2 Main Beams. |
| MAIN FRAME | RHS Stackable Frame with stud frame infill's. Can be stacked 3 units high. |
Stud Frame - minimal RHS support frames - can not be stacked. |
| FLOOR | Compressed Fibre Cement 18mm - Termite Proof !!! | Ply or Compressed Chipboard. |
| WALLS - INTERNAL | Maglite Magnesium Board 12mm - Fire rated to 90 min. | Vinyl Ply sheet 4mm or Gyprock. |
| WALL FINISHING | 5mm Aluminium Composite Panel. | As Above with Vinyl Ply - no extra finish or if Gyprock painted. |
| CEILING | 1 layer Maglite 12mm plus Aluminium Panel Ceiling System | Vinyl Ply sheet 4mm or Gyprock. |
| WINDOWS | Double Glazed Aluminium windows with 13mm glass. This provides significant reductions in heating and cooling costs. Recent surveys show up 48% of energy is lost through single glazed aluminium windows. Roof insulation is quite ineffective without also insulating your windows and doors. |
Single Glazed Aluminium windows - use 3 times the energy to produce. |
| AIR CONDITIONING | Hybrid Solar with Mitsubishi Electric Motors. Reverse cycle split. Will save min 30% on power cost. |
Standard or Inverter split system. |
| ENERGY SAVING KEY | All units are fitted with Energy saving key switch for Air Conditioners. Switch is keyed alike to front door and must be switched off & removed prior to leaving room. |
No energy saving key switch or swipe system as standard. |
| WINDOWS - SUN DAMAGE |
Double glazed windows reduce the amount of sun and heat entering the room. This can help reduce sun damage to furniture, floor coverings & personal belongings. |
No Protection. |
| WINDOWS - ACOUSTIC | Double glazed windows reduce noise by up to 70%. Upvc Double Glazed Windows offer potential noise reduction of 45dB. | No noise reduction. |
| INSULATION - THERMAL |
All external walls & roof exceed R Codes for BCA 2012 with appropriately rated batts + an external layer of Thermal Break additional to R Rating required. Walls R3.5, Roof R4.1, Floor R2.5. |
Meet current R Codes as required. Walls R2, Roof R2.5, Floor - currently no requirement. |
| INSULATION - ACOUSTIC |
Meets all BCA requirements. | Meets all BCA requirements. |
| FLOOR COVERINGS | Polyflor Vinyl. | Vinyl. |